Ignition Lock Cylinder Control Solenoid Replacement

Ignition Lock Cylinder Control Solenoid Replacement

Removal Procedure




Warning: Refer to SIR Warning (SIR Warning).
1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling (Service and Repair).
2. Remove the steering column shroud. Refer to Steering Column Shroud Replacement (Steering Column Shroud Replacement).
3. Remove the ignition lock cylinder solenoid.

Installation Procedure




1. Install the ignition lock cylinder solenoid.
2. Install the steering column shroud. Refer to Steering Column Shroud Replacement (Steering Column Shroud Replacement).
3. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).