LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Fixed And MOVEABLE Windows >> Diagnostic Information and Procedures >> Power Windows Malfunction >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

  1. Ignition OFF, disconnect the harness connector at the appropriate window motor.
  2. Install a 25A fused jumper wire between the control terminal 1 and 12 volts. Momentarily install a jumper wire between the control terminal 2 and ground. The window motor should perform the UP or DOWN function.
    • If the function does not perform as specified, replace the window motor.
  3. Reverse the jumper wires; the window motor should perform the DOWN or UP function.
    • If the function does not perform as specified, replace the window motor.
scientia non olet · About LEMON Manuals