LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Circuit Protection - Fusible Links >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Protection - Fusible Links: Notes

Special Tools 

EL 39200:  Digital Multimeter (DMM)

For equivalent regional tools, refer to Special Tools .

Fusible link is wire designed to melt and break continuity when excessive current is applied. It is often located between or near the battery and starter or electrical center. Use a continuity tester or a Digital Multimeter (DMM) at each end of the wire containing the fusible link in order to determine if it is broken. If broken, it must be replaced with fusible link of the same gauge size.

scientia non olet · About LEMON Manuals