October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Install the ECM (1) into the ECM mounting bracket, allowing the tabs to fully engage.
Courtesy of GENERAL MOTORS CORP.
- Connect the body wiring harness ECM connector to the ECM.
- Engage the CPA retainer.
Courtesy of GENERAL MOTORS CORP.
- Connect the engine wiring harness ECM connectors to the ECM.
- Engage the CPA retainer.
- If a NEW ECM was installed, the ECM must be programmed. Refer to Control Module References
.
- If equipped with a manual transmission, perform the clutch pedal position sensor learn procedure. Refer to Clutch Pedal Position Sensor Learn
.