LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Bushing Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front drive axle, if equipped. Refer to Differential Carrier Assembly Replacement .
  2. Remove the lower control arm. Refer to Lower Control Arm Replacement (2WD, Z85, ZQ8) .
    3. Fig 1: View Of Rear Bushing
    GM1241417Courtesy of GENERAL MOTORS CORP.
  3. Before removing the bushing, measure and record the distance from the bushing flange to the bracket. This will be the distance that the new bushing will be installed to.
    4. Fig 2: Identifying J 41805
    GM1241423Courtesy of GENERAL MOTORS CORP.
  4. Using the J 41805  (1), remove the rear bushing. See Special Tools .
scientia non olet · About LEMON Manuals