LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3T Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection >> Repair Instructions >> Rearview Camera Image Display Module Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Rearview Camera Image Display Module Replacement

Fig 1: Rearview Camera Image Display Module
GM1912775Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedures: 
Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement (Left Hand Drive) or Driver Knee Bolster Replacement (Right Hand Drive) .
1 Rearview Camera Image Display Module Bolt
CAUTION: Refer to Fastener Caution .

Tighten:  9 N.m (80 lb in)
2 Rearview Camera Image Display Module Nut

Tighten:  9 N.m (80 lb in)
3 Rearview Camera Image Display Module Assembly

Procedure

  1. Disconnect the electrical connector.
  2. Reprogram the module if replacing the unit. Refer to Control Module References .
scientia non olet · About LEMON Manuals