LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3T Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.7L - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement >> Assembly Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Assembly Procedure

    Fig 1: Fuel Tank Lines
    GM1564233Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank module. Refer to Fuel Tank Module Replacement .
  2. Install and engage the EVAP vapor line (2) to the retaining clip.
  3. Connect the EVAP vapor line (2) to the fuel tank vent valve, and fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install and engage the fuel feed line (1) to the fuel tank.
  5. Using a flare nut wrench and a back up wrench, Connect the fuel feed line (1) fitting to the fuel tank module and tighten to 30 N.m (22 lb ft).
scientia non olet · About LEMON Manuals