LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3T Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls And Fuel - 3.7L - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Pump Flow Control Module Replacement

Fig 1: Fuel Pump Flow Control Module
GM2106684Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the spare tire. Refer to Spare Tire Carrier Replacement .
1 Fuel Pump Flow Control Module Fastener (Qty: 3)
CAUTION: Refer to Fastener Caution

Tip:  The bolts used are two headed and can be loosened from the module side, then maneuvered out of the slots.

Tighten:  9 N.m (80 lb in)
2 Fuel Pump Flow Control Module

Procedure

  1. Disconnect the electrical connector.
  2. If replacing the fuel pump flow control module, program the control module. Refer to Control Module References .
scientia non olet · About LEMON Manuals