October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Turn Signal Multifunction Switch Replacement
Courtesy of GENERAL MOTORS CORP.
| Callout |
Component Name |
|
Preliminary Procedures
- Remove the steering wheel. Refer to Steering Wheel Replacement .
- Remove the steering column shroud. Refer to Steering Column Shroud Replacement .
|
| 1 |
Turn Signal Multifunction Switch Bolt (Qty: 3)
Tighten:
4.5 N.m (40 lb in)
|
| 2 |
Turn Signal Multifunction Switch
Procedure:
Disconnect any electrical connectors as needed.
Tip:
- The turn signal multifunction switch and the Inflatable restraint steering wheel module coil are serviced as an assembly.
- Do not remove the centering tab from a new turn signal multifunction switch until it has been installed or re-centering will be required.
- If re-centering of the turn signal multifunction switch is needed then refer to Inflatable Restraint Steering Wheel Module Coil Centering
.
|