Wheel Alignment Specifications

WARNING: This page is about a different car, the 1992 Hyundai Sonata, 1992 Hyundai Scoupe, 1992 Hyundai Excel, and 1992 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT SPECIFICATIONS (ELANTRA)

Application

Preferred

Range

Camber ⁽¹⁾

Front

-1/2 To 1/2

Rear

-2/3

N/A

Caster ⁽¹⁾

Front ⁽²⁾

2 1/3

N/A

Toe-In ⁽¹⁾

Front

-1/2 To 1/2

Rear

N/A

Steering Axis Inclination (SAI) ⁽¹⁾

12 1/2

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Specifications for rear angles not available.

WHEEL ALIGNMENT SPECIFICATIONS (EXCEL)

Application

Preferred

Range

Camber ⁽¹⁾

Front

-1/2 To 1/2

Rear

-11/16

-1 To -3/16

Caster ⁽¹⁾

Manual Steering

Front ⁽²⁾

1/2 To 1 1/2

Power Steering

Front

1 11/16

1 3/16 To 2 3/16

Toe-In ⁽¹⁾

Front

1/16

-1/8 To 5/16

Rear

N/A

Toe-In ⁽³⁾

Front

1/32 (.8)

-1/16 To 5/32 (-2 To 4)

Rear

N/A

Toe-Out On Turns ⁽¹⁾

Front ⁽²⁾

Inner

37 3/8

N/A

Outer

31 1/2

N/A

Steering Axis Inclination (SAI) ⁽¹⁾

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Specifications for rear angles not available.

⁽³⁾	Measurement in inches (mm).

WHEEL ALIGNMENT SPECIFICATIONS (SCOUPE)

Application

Preferred

Range

Camber ⁽¹⁾

Front

-5/32

-21/32 To 11/32

Rear

-21/32

-1 5/32 To 5/16

Caster ⁽¹⁾

Front ⁽²⁾

Manual Steering

1 3/32

19/32 To 1 19/32

Power Steering

1 23/32

1 7/32 To 2 7/32

Toe-In ⁽¹⁾

Front

1/16

-3/16 To 5/16

Rear

N/A

Toe-In ⁽³⁾

Front

1/32 (.8)

-3/32 To 5/32 (-2 To 4)

Rear

N/A

Toe-Out On Turns ⁽¹⁾

Front ⁽²⁾

Inner

37 13/32

N/A

Outer

31 1/2

N/A

Steering Axis Inclination (SAI) ⁽¹⁾

13 7/32

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Specifications for rear angles not available.

⁽³⁾	Measurement in inches (mm).

WHEEL ALIGNMENT SPECIFICATIONS (SONATA)

Application ⁽¹⁾

Preferred

Range

Camber ⁽²⁾

1/2

0 To 1

Caster ⁽²⁾

1 1/2 To 2 1/2

Toe-In ⁽²⁾

-1/4 To 1/4

Toe-In ⁽³⁾

-1/8 To 1/8 (-3 To 3)

Toe-Out On Turns ⁽²⁾

Inner

37 1/8

N/A

Outer

30 3/16

N/A

Steering Axis Inclination (SAI) ⁽²⁾

13 7/16

N/A

⁽¹⁾	Specifications for rear angles not available.

⁽²⁾	Measurement in degrees.

⁽³⁾	Measurement in inches (mm).