Connecting Rod, Engine

Crankshaft, inch:
Standard Journal Diameter:
Main Bearing 2.2433-2.2439
Crank Pin 1.7709-1.7715
Out Of Round, All 0.0006
Taper, All 0.0002

Bearing Clearance, inch:
Main Bearings 0.0008-0.0020
Connecting Rod Bearings 0.0008-0.0020
Thrust Bearing Clearance 0.0020-0.0071

Connecting Rods Side Clearance, inch 0.0040-0.0098