LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 1996 >> Accent L, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Direct Ignition System (Dis) >> Ignition Coil Resistance
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Coil Resistance

  1. Using an ohmmeter, check primary coil resistance for cylinders No. 1 and 2 between coil connector terminals No. 1 and 3. Check resistance for cylinders No. 3 and 4 between connector terminals No. 2 and 3. See Fig 1 . See DIS IGNITION COIL RESISTANCE table.
  2. To check secondary coil resistance, disconnect ignition coil connector. Check resistance between coil towers No. 1 and 4 and between coil towers No. 2 and 3. See DIS IGNITION COIL RESISTANCE table. Replace coil if readings are not within specification.
DIS IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

Application Primary Secondary
Accent .45-.55 10,300-13,900
Fig 1: Testing DIS Coil Resistance (Accent)
G95B30958Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals