Power Window Relay

Remove power window relay from engine compartment relay box. Using ohmmeter, check continuity between indicated relay terminals. See POWER WINDOW RELAY TEST table. SeeFig 1 . Replace relay if continuity is not as specified.

POWER WINDOW RELAY TEST

Relay Terminals

Continuity

1 & 3

Yes

2 & 4

⁽¹⁾

⁽¹⁾	Continuity should exist with battery voltage applied between relay terminals No. 1 and 2. Continuity should not exist with no voltage applied.

Fig 1: Power Window Relay Terminals

Courtesy of HYUNDAI MOTOR CO.