Power Window Main Switch
Remove main switch. Check continuity between specified terminals with switch in specified position. See MAIN SWITCH CONTINUITY . SeeFig 1 . If continuity is not as specified, replace main switch.
MAIN SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. | |||
|---|---|---|---|---|
| Left Front | ||||
| Up | 4 & 11; 6 & 10 | |||
| Off | 4, 6 & 11 | |||
| Down | 4 & 6; 10 & 11 | |||
| Right Front | ||||
| Up | 4 & 9; 8 & 10 | |||
| Off | 4, 8 & 9 | |||
| Down | 4 & 8; 9 & 10 | |||
| Left Rear | ||||
| Up | 4 & 13; 10 & 12 | |||
| Off | 4, 12 & 13 | |||
| Down | 4 & 12; 10 & 13 | |||
| Right Rear | ||||
| Up | 2 & 4; 3 & 10 | |||
| Off | 2, 3 & 4 | |||
| Down | 2 & 10; 3 & 4 | |||
| Lock Switch | ||||
| Lock | (1) | |||
| Unlock | 5 & 10 | |||
|
||||