Specifications Index
SONATA SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM GENERAL SERVICING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Battery | |||
| 2.0L | See BATTERY SPECIFICATIONS table under CAPACITIES | ||
| 3.0L | See BATTERY SPECIFICATIONS table under CAPACITIES | ||
| Axle Nut/Hub Nut | 148-192 Ft. Lbs. (200-260 N.m) | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 11-15 psi | ||
| Thermostat R & I | |||
| 2.0L | THERMOSTAT | ||
| 3.0L | THERMOSTAT | ||
| Water Pump R & I | |||
| 2.0L | WATER PUMP | ||
| 3.0L | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | |||
| 2.0L | ENGINE COMPRESSION | ||
| 3.0L | ENGINE COMPRESSION | ||
| Oil Pressure | |||
| 2.0L | Oil pressure should be at least 11.4 psi (.80 kg/cm2 ) at curb idle with an oil temperature of 167-194°F (75-90°C). | ||
| 3.0L | At curb idle and with oil temperature 167-194°F (75-90°C), normal oil pressure should be at least 11 psi (.77 kg/cm2 ). | ||
| Overhaul | |||
| 2.0L | ENGINE SPECIFICATIONS | ||
| 3.0L | ENGINE SPECIFICATIONS | ||
| Torque | |||
| 2.0L | TORQUE SPECIFICATIONS | ||
| 3.0L | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Drive Plate/Flex Plate | |||
| 2.0L | 96-103 Ft. Lbs. (130-140 N.m) | ||
| 3.0L | 54-57 Ft. Lbs. (73-77 N.m) | ||
| Fuel System | |||
| Fuel Filter Location | |||
| 2.0L | FUEL FILTER | ||
| 3.0L | FUEL FILTER | ||
| Fuel Filter Removal | |||
| 2.0L | FUEL FILTER | ||
| 3.0L | FUEL FILTER | ||
| Fuel Pressure Release Procedure | |||
| 2.0L | FUEL SYSTEM PRESSURE RELEASE | ||
| 3.0L | FUEL SYSTEM PRESSURE RELEASE | ||
| Fuel Pressure Specifications | |||
| W/O Vacuum | 46-49 psi (3.2-3.4 kg/cm2 ) | ||
| W Vacuum | 39 psi (2.7 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | |||
| 2.0L | FUEL PRESSURE TEST | ||
| 3.0L | FUEL PRESSURE TEST | ||
| Ignition | |||
| 2.0L | |||
| Firing Order & Cylinder Identification | FIRING ORDER & TIMING MARKS | ||
| Ignition Wires (Resistance) | HIGH-TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER & TIMING MARKS | ||
| 3.0L | |||
| Firing Order & Cylinder Identification | FIRING ORDER & TIMING MARKS | ||
| Ignition Wires (Resistance) | HIGH-TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | N/A | ||
| Spark Plugs | |||
| 2.0L | SPARK PLUGS | ||
| 3.0L | SPARK PLUGS | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 66-81 Ft. Lbs. (90-110 N.m) | ||