Service

Standard Value

Input Shaft Rear Bearing:
End Play 0 - 0.05L mm (0 - 0.0019L inch)
Output Shaft Rear Bearing:
End Play 0.10T - 0.15T mm (0.0039T - 0.0059T inch)
Differential Rear Bearing:
End Play 0.20T - 0.25T mm (0.0078T - 0.0090T inch)
Gear Backlash In Differential 0.025 - 0.150 mm (0.0009 - 0.0059 inch)

T: Indicates Tightening Of -(Minus) Direction Of End Play
L: Indicates loosing of +(plus) direction of end play