Specifications Index
ACCENT SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | SPECIFICATIONS | |
| Torque | N/A | |
| Axle Nut/Hub Nut | 148-192 ft. lbs. (200-260 N.m) | |
| Battery | N/A | |
| Brakes | ||
| Bleeding Sequence | BLEEDING PROCEDURES | |
| Disc Brakes | DISC BRAKE SPECIFICATIONS | |
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Charging | ||
| Generator | See GENERATOR OUTPUT SPECIFICATIONS table under GENERATOR OUTPUT TEST | |
| Torque | TORQUE SPECIFICATIONS | |
| Drive Belts | ||
| Adjustment | BELT TENSION INSPECTION & ADJUSTMENT | |
| Belt Routing | DRIVE BELT ROUTING | |
| Engine Cooling | ||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | |
| Radiator Cap Pressure | 11-15 psi | |
| Thermostat R & I | N/A | |
| Water Pump R & I | WATER PUMP | |
| Engine Mechanical | ||
| Compression | ENGINE COMPRESSION | |
| Oil Pressure | Normal oil pressure is at least 21.33 psi (1.5 kg/cm2 ) at curb idle with oil temperature of 167-203°F (75-95°C). | |
| Overhaul | ENGINE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flex Plate Torque | 96-103 ft. lbs. (130-140 N.m) | |
| Fuel System | ||
| Fuel Filter Location | Located next to fuel pump. | |
| Fuel Filter R & I | N/A | |
| Pressure Specification | FUEL PUMP | |
| Fuel Pressure Test Procedure | FUEL PRESSURE TEST | |
| Fuel Pressure Release Procedure | FUEL PRESSURE RELEASE | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Resistance) | HIGH-TENSION WIRE RESISTANCE | |
| Ignition Wires (Routing) | FIRING ORDER & TIMING MARKS Wire routing may be located in Figure. | |
| Spark Plugs | SPARK PLUGS | |
| Starting | ||
| Starter | STARTER SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel Alignment | ||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel & Tire | ||
| Lug Nut Torque | 66-81 ft. lbs. (90-110 N.m) | |