LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2001 >> XG300 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Ignition Checks >> Direct Ignition System (Dis) >> Ignition Coil Resistance (Tiburon)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Resistance (Tiburon)

  1. Disconnect ignition coil 3-pin connector. Measure primary coil resistance for cylinders No. 2 and 3 between coil connector terminals No. 1 and 3. Measure primary coil resistance for cylinders No. 1 and 4 between connector terminals No. 2 and 3. See Figure. If resistance is not as specified, replace coil. See DIS IGNITION COIL RESISTANCE  table.
  2. To check secondary coil resistance, disconnect spark plug wires. Measure resistance between high-voltage coil terminals No. 1 and 4, and between high-voltage coil terminals No. 2 and 3. See DIS IGNITION COIL RESISTANCE  table. If resistance is not as specified, replace coil.
scientia non olet · About LEMON Manuals