DTC P0300: Random Misfire Detected: Notes
NOTE:
Battery voltage is applied to both ignition coils when ignition switch is in ON or START position. PCM energizes primary ignition coils by switching ground circuit on and off. Ignition coil No. 1 fires cylinders No. 2 and 5. Ignition coil No. 2 fires cylinders No. 1 and 4. Ignition coil No. 3 fires cylinders No. 3 and 6. Ignition power transistor, controlled by PCM, provides switching circuit to ground for energizing coils. A part of the ignition power transistor, the tachometer interface, provides RPM signal to PCM and Transaxle Control Module (TCM).