Fuel Pump Relay Test (Sonata 2.7L)
- Locate and remove fuel pump relay, see FUEL PUMP RELAY LOCATION table. Using fused jumper wire, apply battery voltage to relay terminal No. 4. Using second fused jumper wire, ground relay terminal No. 2 (component side). See Figure, and go to next step.
- With relay energized, check for continuity between relay terminals No. 1 and 5 (component side). Continuity should be present until voltage is disconnected. If continuity is not as specified, replace fuel pump relay.
FUEL PUMP RELAY LOCATION
| Application | Fuel Pump Relay Location |
|---|---|
| Accent, Elantra & Santa Fe | Engine Compartment Fuse/Relay Box |
| Sonata & XG350 | Right Side Of Instrument Panel In Center Support, Under Radio |