Explanation of Error Message

1. "INVALID PASSWORD": Please enter the correct password again.

2. "REPROGRAMMING ERROR PLEASE WAIT FOR RETRY": An error occurred during reprogramming, the Hi-Scan Pro will retry the reprogramming automatically.

3. "ALREADY REPROGRAMMED" or "INCORRECT TARGET ID" : The reprogramming has previously been done on this vehicle or the ECM is not the correct type for this reprogramming procedure.

4. "REPROGRAM ERROR, PLEASE CHECK THE SYSTEM" : In this case you must reprogram manually after selecting the menu option "02. XG300/350 REAR 02 SENSOR [ERROR]".