Removal & Installation

Remove the air bag module.

Fig 1: Identifying Air Bag Module
Courtesy of HYUNDAI MOTOR CO.

Tightening torque

Air bag module mounting bolts:

4-6 Nm (40-60 kg.cm, 2.9-4.4 lb.ft)
Remove the steering wheel.

Fig 2: Identifying Steering Wheel Nut
Courtesy of HYUNDAI MOTOR CO.
Remove the steering column upper shroud and steering column lower shroud.

Fig 3: Identifying Steering Column Shroud Screws
Courtesy of HYUNDAI MOTOR CO.
Remove the screws holding the multi function switch and disconnect the connectors. Remove the multi function switch assembly.

Fig 4: Identifying Multifunction Switch Screws
Courtesy of HYUNDAI MOTOR CO.
Remove the mounting bolts and separate the ignition switch from steering column.
Installation is the reverse of removal.