Keyless Entry - Transmitter Battery Replacement

REMOTE TRANSMITTER BATTERY REPLACEMENT

MODEL: 2003-2005 TIBURON

DESCRIPTION:

This article describes the security system remote transmitter battery replacement procedure for the 2003- 2005 MY Tiburon.

SERVICE PROCEDURE:





1. Using a flat blade screwdriver, open and separate the remote transmitter housing.





2. Carefully remove the transmitter circuit board from its housing.

3. Using your thumb, care fully push and lift the battery against the retainer clip.





CAUTION:
Do not use tools to pry the battery from its holder.





4. Install the new battery by pushing it against the retainer clip and carefully positioning it down in the holder.

5. Install the circuit board into its housing, making sure the Lock and Unlock buttons face up.

6. Carefully snap the two halves closed.

7. Verify that the remote transmitter functions correctly.





NOTE:
See the Tiburon Shop Manual's Body Electrical System section for programming (adding) transmitter code.





WARRANTY INFORMATION