LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2003 >> XG350 Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Electronic Time & Alarm Control System >> Transmitter Code Registration >> Using Code Saving Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Code Saving Switch

  1. Remove the lower crash pad panel.
    Fig 1: Removing Lower Crash Pad Panel
    G00720652Courtesy of HYUNDAI MOTOR CO.
    NOTE: Don't disconnect the negative (-) battery terminal.
  2. To store new codes:
    • Activate the keyless entry/receiver unit and change code saving switch on the ETACS module from "OFF" to "SET".
    • The secret codes from the transmitter will be stored into the receiver unit when the door lock button or unlock button is pressed on the transmitter.
    • Save the 2nd transmitter codes in the same manner.
      Fig 2: Identifying Code Saving Switch On ETACS
      G00720653Courtesy of HYUNDAI MOTOR CO.
  3. Return the code saving switch on the ETACS module from "SET" to "OFF".
    Fig 3: Identifying Code Saving Switch "SET" & "OFF" Positions
    G00720654Courtesy of HYUNDAI MOTOR CO.
  4. Install the lower crash pad panel.
scientia non olet · About LEMON Manuals