Section 13 (Engine Controls - Removal & Installation): Introduction

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 Hyundai XG350, 2003 Hyundai Tiburon, 2003 Hyundai Sonata, 2003 Hyundai Santa Fe, and 2003 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal and installation information for Santa Fe models equipped with 3.5L V6 engine is not available from the manufacturer.

Removal and installation procedures are covered in this article. If component removal and installation is primarily an unbolt and bolt-on procedure, only a torque specification may be furnished.

CAUTION: When battery is disconnected, vehicle computer and memory system may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES - HYUNDAI article in GENERAL INFORMATION before disconnecting battery.