LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2004 >> Tiburon Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Mirrors >> Electronic Time And Alarm Control System (ETACS) >> ETACS (Electronic Time And Alarm Control System) >> Transmitter >> Programming Transmitter Code
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Transmitter Code

  1. To program the transmitter code, first connect the hi-scan (pro) to the Data Link Connector (DLC) in drive side crash pad lower panel.
    Fig 1: Programming Transmitter Code
    G01992638Courtesy of HYUNDAI MOTOR CO.
  2. Turn the power on hi-scan (pro) with the ignition switch ON.
  3. Select the vehicle model on hi-scan (pro).
  4. After selecting "CODE SAVING" menu then button "ENTER" key.
  5. Proceed as follow steps and then code saving is completed.
    1. Press [ENTER] key, if you are ready.
    2. Press the transmitter [LOCK] button above 1 second.
    3. If you save transmitter one more, press other transmitter [LOCK] button above 1 second.
    4. Turn the hi-scan (pro) off, and check the keyless entry system.
scientia non olet · About LEMON Manuals