LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2005 >> Elantra GLS, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System >> DTC Troubleshooting Procedures >> DTC P0077: Intake Valve Control Solenoid Circuit High (Bank 1) >> Control Circuit Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Control Circuit Inspection

  1. Ignition "OFF".
  2. Disconnect intake valve control solenoid and PCM connectors.
  3. Ignition "ON".
  4. Measure voltage between terminals 1 of the intake valve control solenoid connector and chassis ground.

    Specification : Below 0.5V

    Fig 1: Measuring Voltage Between Terminals 1 Of Intake Valve Control Solenoid Connector And Chassis Ground
    G03842673Courtesy of HYUNDAI MOTOR CO.
  5. Is voltage within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals