October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Signal Circuit Inspection

Ignition "OFF"
Disconnect OTS connector.
Measure resistance between terminal 2 of the sensor harness connector and chassis ground.
Specification : Infinite

Fig 1: Measuring Resistance Between Terminal 2 Of Sensor Harness Connector And Chassis Ground
Courtesy of HYUNDAI MOTOR CO.
Is resistance within the specification?
YES
- Go to TERMINAL AND CONNECTOR INSPECTION procedure.
NO
- Repair short to ground in harness and go to VERIFICATION OF VEHICLE REPAIR procedure.