Fuel System (G6BA-GSL 2.7L): General: Specifications
GENERAL SPECIFICATIONS (G6BA - GSL 2.7L)
| Items | Specifications | |||
|---|---|---|---|---|
| Throttle body | Throttle Position Sensor (TPS) | Type | Variable resistor | |
| Resistance at curb idle | 1.6 ~ 2.4 kΩ | |||
| Output voltage at curb idle | 250 ~ 800 mV | |||
| Idle Speed Control Actuator (ISA) | Type | Double coil | ||
| Resistance | Opening | 14.5 ~ 16.5 Ω | ||
| Closing | 16.6 ~ 18.6 Ω | |||
| Sensors | Mass Air Flow (MAF) Sensor | Type | HOT Film sensor (MAF) | |
| Intake Air Temperature Sensor(ATS) | Type | Thermistor type (Built in MAF) | ||
| Resistance | 2.22~ 2.82 kΩ at 20°C(68°F) | |||
| Engine Coolant Temperature Sensor (ECTS) | Type | Thermistor type | ||
| Resistance | 2.31~2.59 kΩ at 20°C (68°F) | |||
| 0.30~0.34 kΩ at 80°C (176°F) | ||||
| Heated Oxygen Sensor (HO2S) | Type | Zirconia type | ||
| Vehicle Speed Sensor (VSS) | Type | Hall effect type | ||
| Camshaft Position (TDC) Sensor | Type | Hall effect sensor | ||
| Crankshaft Position (CKP) Sensor | Type | Hall effect sensor | ||
| Actuators | Injector | Type, number | Electromagnetic type, 6 | |
| Resistance | 13 ~ 16Ω at 20°C(68°F) | |||
| Purge Control Solenoid Valve (PCSV) | Type | Duty cycle type | ||
| Resistance | 24.5 ~ 27.5Ω | |||
| Fuel pressure regulator | Injector opening pressure | 300 +/- 1.5 kPa (3.35 +/- 0.06 kg/cm2 ) | ||
| Fuel tank | Capacity | 65 lit (17.1 US gal, 14.3 Imp.gal) | ||
| Return system | Equipped | |||
| Canister | Volume/Nominal working capacity | 3.0 liter/150 g | ||