DTC P0707 Transaxle Range Sensor - Low: DTC Detecting Condition

DTC DETECTING CONDITION

Item	Detecting Condition & Fail Safe	Possible Cause
DTC Strategy	Check for No signal	Open or short in circuit Faulty TRANSAXLE RANGE SWITCH Faulty TCM(PCM)
Enable Conditions	Continuous
Threshold value	No signal detected
Diagnostic Time	More than 30sec
Fail Safe	Recognition as previous signal When P-D or R-D or D-R SHIFT is detected, it is regarded as N-D or N-R though "N" signal is not detected. When sports mode S/W is ON without P,R,N, D-RANGE signals, it is regarded sports mode. (DTC is not set)