LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2006 >> Accent Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P0630 VIN Not Programmed Or INCOMPACTIBLE-ECM/Pcm >> Monitor SCANTOOL Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor SCANTOOL Data

  1. Ignition "OFF"
  2. Connect Scantool and Ignition "ON"
  3. Monitor the ECM/PCM status using the VIN READING function.
  4. Is the ECM/PCM status Virgin ?

    YES  : --> Perform VIN writing procedure according to the direction on the scantool screen and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO  : --> Fault is intermittent caused by poor contact in Sensor's and/or ECM/PCM's connector or was repaired and ECM/PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

scientia non olet · About LEMON Manuals