DTC P0113 Intake Air Temperature Sensor 1 Circuit High Input: DTC Detecting Condition

DTC DETECTING CONDITION

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage range check	Short to battery in signal harness Open in signal or ground circuit Contact resistance in connections Faulty IAT sensor
Enable Conditions	6 < Battery voltage < 16V Time after start in case of SCB or OL: 110 sec.
Threshold Value	Measured intake air temperature < -46°C(-51°F).
Diagnostic Time	5 seconds
Fail-Safe	No failure detected on ECTS The limp home value of IATS depends on engine coolant temperature. Failure detected on ECTS PCM controls with mapping data.