LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2006 >> Elantra Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (F4A42) >> Automatic Transaxle Control System >> Vehicle Speed Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Vehicle Speed Sensor: Inspection

  1. Remove the vehicle speed sensor and connect a 3-10 KΩ resistance as shown in the illustration.
  2. Turn the shaft of the vehicle speed sensor and check that there is voltage between terminals 1~2 (1 turn = 4 pulses).
Fig 1: Checking Voltage Between Terminals
G04924382Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals