Fuel System (G6CU-GSL 3.5): General: Specification
GENERAL SPECIFICATION
| Fuel tank | |
|---|---|
| Capacity | 72 lit. (19.05 U.S.gal., 15.84 Imp. gal.) |
| Fuel filter | |
| Type | High pressure type |
| Fuel pump | |
| Type | Electrical, in-tank type |
| Driven by | Electric motor |
| Throttle body (with ETC system) | |
Throttle Position Sensor (TPS)
Idle Speed Control (ISC) motor Idle position switch |
0.5 ~ 1.0V (TPS1-ETS) 4.0 ~ 4.5V (TPS2-ECM) 4.2 - 4.8V (TPS1-ETS) 0.2 - 0.8V (TPS2-ECM) Controlled by ETC system Contact type (Built in APS) |
| Input sensor | |
| Mass air flow sensor | |
|
Hot film type |
| Intake air temperature (IAT) sensor | |
|
Thermistor type 2.33 - 2.97kΩ or 2.5 ~ 2.7V at 20°C(68°F) 0.31 ~ 0.43kΩ or 0.6 ~ 0.8V at 80°C(176°F) |
| Engine coolant temperature (ECT) sensor | |
|
Thermistor type 2.4kΩ or 2.5 ~ 2.7V at 20°C(68°F) 0.3kΩ or 0.5 ~ 0.7V at 80°C(176°F) |
| Heated oxygen sensor (HO2S) | |
|
Zirconia sensor |
| Vehicle speed sensor | |
|
Hall IC type |
| Camshaft position (CMP) sensor | |
|
Hall effect sensor |
| Crankshaft position (CKP) sensor | |
|
Hall effect sensor |
| Fuel tank pressure (FTP) sensor | |
|
Piezo-resistivity type OmmHg (0 Kpa): 2.5V -50mmHg (-6.6 Kpa): 0.5V +50mmHg (+6.6 Kpa): 4.5V |
| Output actuator | |
| Injector | |
|
Electromagnetic type 6 13 ~ 16Ω at 20°C(68°F) |
| Limp home valve | |
|
Duty Type 7.7 ~ 9.3Ω at 23°C(73°F) |
| Fuel pressure regulator | |
|
314 - 343kPa (3.20 ~ 3.50kg/cm2 , 45.5 ~ 50 psi) |