Transmitter Code Registration

Connect the DLC cable of scan tool to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on scan tool.

Fig 1: Connecting DLC Cable Of Scan Tool To Data Link Connector
Select the vehicle model and then do "CODE SAVING".

Fig 2: Diagnosis Function Screen Display
After selecting "CODE SAVING" menu, push "ENTER" key, then the screen will be shown as below.

Fig 3: HI-Scan Display - Transmitter Code Save
After removing the ignition key from key cylinder, push "ENTER" key to proceed to the next mode for code saving. Follow steps 1 to 4 and then code saving is completed.

Fig 4: HI-Scan Display - Transmitter Code Save (1 Of 4)

Fig 5: HI-Scan Display - Transmitter Code Save (2 Of 4)

Fig 6: HI-Scan Display - Transmitter Code Save (3 Of 4)

Fig 7: HI-Scan Display - Transmitter Code Save (4 Of 4)