Component Inspection
- Ignition "OFF"
- Disconnect Fuel Sender & Fuel Pump Motor connector and remove Fuel sender from fuel tank.
- Measure resistance between terminal 4 and 6 of Fuel Sender. (Component Side)
- Does the resistance of Fuel level sensor change with lifting up and down the fuel level float?
YES
- There may be scratches on resistance of fuel level sender. Thoroughly check that resistance is suddenly changed by lifting up and down the fuel level float Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Substitute with a known - good Fuel Level Sensor and check for proper operation. If the problem is corrected, replace Fuel Level Sensor and go to "VERIFICATION OF VEHICLE REPAIR " procedure.