Trailing Arm: Installation

Place the trailing arm (C) as shown below.

Fig 1: Identifying Trailing Arm Mounting Nut
Install the trailing arm nuts.
NOTE: Fully tighten the trailing arm mounting nuts with the vehicle on the ground in unloaded condition.
1. Install the trailing arm mounting nut (A).
  Tightening torque Nm (kgf.m, lb-ft):
  
  140~160 (14~16, 101.2~115.7)
2. Install the trailing arm bracket mounting nut (B).
  Tightening torque Nm (kgf.m, lb-ft):
  
  140~160 (14~16, 101.2~115.7)
  
  NOTE: After installing the right trailing arm, install the head lamp leveling link (A).
  
  Fig 2: Identifying Head Lamp Leveling Link