Memory Registration
- Data related to the registration are received through the CAN communication from the power window main on the CAN line.
- If any of the following conditions is met, memory permit status is released.
When the ignition is OFF.
When the manual switch is ON.
- If 2 position switches are pressed ON simultaneously (within time interval of 50 ms) in memory registration, none of the switches are valid, and the first pressed switch is valid if the time interval is greater than 50 ms.
- If the vehicle speed is over the limit speed of 3 Km/h or shift lever is at the position other than P, registration cannot be performed.
- Registration can be revised without any limitation.
- Memory will be cleared if the battery is removed.
- If the memory registration is permitted (memory switch is ON), it sounds the buzzer.