LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Azera SE >> Repair and Diagnosis >> Body & Frame >> Windows >> Exterior >> Trunk Lid >> Replacement >> Key Holder Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Key Holder Replacement

  1. Remove the trunk lid trim (See TRUNK LID TRIM REPLACEMENT  ).
  2. Remove the trunk lid garnish (A).
    Fig 1: Identifying Trunk Lid Garnish
    G04881057Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the outside handle rod (B) and connector (A).
  4. Remove the outside handle (C).
    Fig 2: Identifying Outside Handle Rod, Outside Handle And Connector
    G04881058Courtesy of HYUNDAI MOTOR CO.
  5. Loosen the key holder mounting bolt and remove (A).
    Fig 3: Identifying Key Holder Mounting
    G04881059Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals