DTC P2414 Ho2S Exhaust Sample Error (Bank 1/Sensor 1): DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item	Detecting Condition	Detecting Condition
DTC Strategy	Sensor not mounted - Plausibility check in Part load or Full load	Poor connection or damaged harness Front HO2S
Enable Conditions	Sensor tip temp. > 650°C (1202°F) Part load or full load 11V < Battery voltage < 16V No relevant failure
Threshold Value	3.2 V < HO2S < 4.8 V
Diagnostic Time	30 sec.
MIL On Condition	2 Driving Cycles