Solenoid Valve: Installation
- Install the solenoid valve.CAUTION: Apply the ATF oil or White Vaseline to the O-ring not to be damaged.
- Connect the solenoid valve connector to the valve body.CAUTION: When connecting the solenoid valve connector, check the connector for rust, dirt, or oil, then reconnect it.
- Install the valve body (refer to Valve Body Reassembly
in overhaul)
TORQUE:
10~12Nm (1.0~1.2kgf.m,
7~8lb-ft)
- Install the oil filter.
TORQUE :
10~12Nm (1.0~1.2kgf.m,
7~8lb-ft)
- Continue to apply liquid gasket at application points at the oil pan with 02.5mm (0.098in) thickness.
Liquid gasket Part name : Threebond 1281B
- Tighten the mounting bolt with the specified torque after installing the oil pan.
TORQUE:
10~12Nm (1.0~1.2kgf.m, 7~8lb-ft)
- Install the drain plug.
TORQUE:
35~45Nm (3.5~4.5kgf.m, 25~32lb-ft)
- Installation is the reverse of the removal.