Component Inspection
- Check rear defogger
- Connect scantool to Data Link Connector (DLC).
- Ignition "ON" & engine "OFF"
- Check if DTC is erased after replacing defogger with "defogger for test".
- Is the DTC erased?
YES
Replace "defogger for test" with "new defogger" and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
Go to 2"Check RAM".
- Check RAM
- Connect scantool to Data Link Connector (DLC).
- Ignition "ON" & engine "OFF"
- Check if DTC is erased after replacing RAM with "RAM for test".
- Is the DTC erased?
YES
Replace "RAM for test" with "new RAM" and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
Check connecting condition of connector and go to "VERIFICATION OF VEHICLE REPAIR ".