Memory Operation
- Pressing the 'M' button on the control panel will place the system into memory storage mode and will result in a single pulse from the output buzzer.
- If one of the memory location buttons is pressed and held within 5 seconds of pressing the 'M' button, the output buzzer will pulse twice to indicate successful storage of seat, mirror, and adjustable pedal positions.
- The ignition switch must be in the RUN or START position, the vehicle speed must be 0 MPH, and the transaxle must be in V range to store memory presets.
- Pressing the 'M' button while recalling a stored preset will halt the preset recall operation.
- Memory will be cleared if battery is removed.