Automatic Transaxle Control System: Reassembly

Grease the tube (B) and install the lever (A) by tightening the bolt (C).
TORQUE:

8~12 Nm (80~120 kgf.cm, 5.8~8.7 lb-ft)

Fig 1: Identifying Lever, Tube And Bolt
Courtesy of HYUNDAI MOTOR CO.
Install the lever assembly (B) by tightening the bolt (A).
TORQUE:

8~12 Nm (80~120 kgf.cm, 5.8~8.7 lb-ft)

Fig 2: Identifying Lever Assembly With Mounting Bolt
Courtesy of HYUNDAI MOTOR CO.
Install the solenoid (B) and solenoid lever (A).

Fig 3: Identifying Solenoid And Solenoid Lever
Courtesy of HYUNDAI MOTOR CO.
Install the switch assembly (A) and 'P' position switch assembly.
TORQUE:

1.3~1.9 Nm (13~19 kgf.cm, 0.95~1.38 lb-ft)

Fig 4: Identifying Switch Assembly And Position Switch Assembly
Courtesy of HYUNDAI MOTOR CO.
Connect the solenoid connector (A) and install the indicator panel (B).

Fig 5: Identifying Solenoid Connector And Indicator Panel
Courtesy of HYUNDAI MOTOR CO.
Install the shift lever knob (A) by tightening the two screws.
TORQUE:

2~3 Nm (20~30 kgf.cm, 1.45~2.18 lb-ft)

Fig 6: Identifying Shift Lever Knob
Courtesy of HYUNDAI MOTOR CO.
Install both sides of the brackets.
TORQUE:

16~23 Nm (160~230 kgf.cm, 11.6~16.7 lb-ft)