Charging System Test Results
CHARGING SYSTEM TEST RESULTS REFERENCE
| RESULT ON PRINTER | REMEDY |
|---|---|
| Charging system normal/Diode ripple normal | Charging system is normal |
| No charging voltage | Generator does not supply charging current to battery => Check belts, connection between generator and battery Replace belts or cable or generator as necessary |
| Low charging voltage | Generator does not supply charging current to battery and electrical load to system fully => Check belts and generator and replace as necessary |
| High charging voltage | The voltage from generator to battery is higher than normal limit during voltage regulating. => Check connection and ground and replace regulator as necessary => Check electrolyte level in the battery |
| Excess ripple detected | One or more diodes in the generator is not functioning properly => Check generator mounting and belts and replace as necessary |