DTC P161B ECM/Pcm Internal Error - Torque Calculation: DTC Detecting Condition

DTC DETECTING CONDITION

ITEM		Detecting Condition	Possible Cause
DTC Strategy		Determines if Delivered Torque Is Grossly Different from Desired Torque	Intake air leakage Faulty ETS System Clogged exhaust system Faulty PCM
Enable Conditions	Case 1	Engine Running state Engine Speed > 600rpm Desired Flywheel Torque Within 20Nm > 1sec.
Enable Conditions	Case 2	Pedal Position < 0.8% Torque Command Source = Accel pedal. Engine speed > desired target engine speed All injectors enabled
Threshold value	Case 1	Actual net target - desired torque > threshold
Threshold value	Case 2	Normalized fuel flow > threshold
Diagnosis Time		Continuous
MIL On Condition		1 Driving Cycle