Anti-Lock Braking System Control Module: Removal

Disconnect the brake tube from the HECU by unlocking the nuts counterclockwise with a spanner.

Fig 1: Identifying Anti-Lock Braking System Control Module
Courtesy of HYUNDAI MOTOR CO.
Lift up the vehicle.
Disconnect the connector (A) from the HECU.

Fig 2: Identifying Anti-Lock Braking System Control Module Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the two HECU brake mounting bolts (B), and then disassemble the HECU with the bracket.
CAUTION:
1. Never attempt to disassemble the HECU.
2. The HECU must be transported and stored in
3. Never shock to the HECU.
Remove the two HECU mounting nuts and washer, and then remove the bracket.