DTC P0122 Throttle/Pedal Position Sensor/Switch "A" Circuit Low Input: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage range check	Open in power supply harness Short to ground in power supply or signal harness Contact resistance in connectors Faulty TP sensor
Enable Conditions	6 less than equal Battery voltage less than equal 16V
Threshold Value	Voltage < 0.14V
Diagnostic Time	1 sec
Fail Safe	Throttle position value is determined by function of engine speed, mass air flow and idle duty
Mil On Condition	2 Driving Cycles