October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ground Circuit Inspection

Ignition "OFF".
Disconnect FLS and ECM connector.
Measure resistance between terminal 1 of the FLS harness connector and 15 of the ECM harness connector
Specification: Approx. 0Ω
Is resistance within the specification?
YES:
- Go to "SIGNAL CIRCUIT INSPECTION " procedure.
NO:
- Check for a open/short circuit. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.