ECM Neutralization

Fig 1: Scantool Display - ECM Neutralization (1 Of 5)

Courtesy of HYUNDAI MOTOR CO.

Fig 2: Scantool Display - ECM Neutralization (2 Of 5)

Courtesy of HYUNDAI MOTOR CO.

Fig 3: Scantool Display - ECM Neutralization (3 Of 5)

Courtesy of HYUNDAI MOTOR CO.

Fig 4: Scantool Display - ECM Neutralization (4 Of 5)

Courtesy of HYUNDAI MOTOR CO.

Fig 5: Scantool Display - ECM Neutralization (5 Of 5)

Courtesy of HYUNDAI MOTOR CO.

This function is for neutralizing the ECM and Key. ex) When lost key, Neutralize the ECM then teach keys. (Refer to the Things to do when Key & PIN Code The ECM can be set to the "neutral" status by a scanner. A valid ignition key is inserted and after ignition on is recorded, the ECM requests the vehicle specific data from the scanner. The communication messages are described at "Neutral Mode". After successfully receiving the data, the ECM is neutralized.

The ECM remains locked. Neither the limp home mode nor the "twice ignition on" function is accepted by ECM.

The teaching of keys follows the procedure described for virgin ECM. The vehicle specific data have to be unchanged due to the unique programming of transponder. If data should be changed, new keys with virgin transponder are requested.